Product Description
Product name: Multi-heat source high-efficiency dryer (burner heating version)
1.Technical parameters and functions
1)Applicable scenarios: chemical raw materials, mineral drying, biomass fuel processing, agricultural by-products (such as straw, sawdust) and other high-temperature demand areas.
(2)Heating efficiency: The burner heats up quickly, with a single preheating time of 10-20 minutes, and the discharging time is shortened to 5-10 minutes.
(3)Capacity design: supports continuous feeding, and a single machine is suitable for small and medium-sized batch production (specific capacity depends on the model).
(4)Maintenance requirements: High-frequency lubrication and maintenance to ensure long-term stable operation of the equipment (see maintenance table for details).
2.core selling point
(1)Flexible heat source, efficient and energy-saving
It adopts burner heating technology (supports gas, oil and other fuel adaptation) to heat up quickly. It can be started after preheating in 10-20 minutes. Materials can be efficiently discharged in 5-10 minutes. It is suitable for scenarios where stable power is not available or high-temperature drying is required, such as remote areas, industrial production lines, etc.
(2)Integrated design, ready to install and use
The whole machine has an integrated structure and four adjustable load-bearing feet to easily adapt to uneven floors. It can be run immediately after wiring, without complicated installation, and can be put into production quickly.
(3)Triple security
Stable heat source: The burner has strong heating controllability and is equipped with a high-temperature resistant cylinder design to ensure the safety of high-temperature operations.
Mechanical protection: automatic lubrication system (gear oil + butter application) before starting up to extend the life of the equipment.
Operating specifications: Strict power-off maintenance mechanism (certified electrician operation is required), high-temperature areas are clearly marked, and discharging materials require special tools to handle.
(4)Intelligent drying and even moisture removal
The built-in dehumidifier fan monitors the humidity in the barrel in real time. After the moisture evaporates, it automatically starts dehumidification and cooperates with the rotation of the lifting plate to ensure uniform drying of materials and consistent quality.
3.Operation process
(1)Preheating start: ignite the burner to heat the cylinder and preheat for 10-20 minutes.
(2)Feeding and drying: start the barrel to rotate forward and gradually feed the material; start the dehumidifier to accelerate moisture removal.
(3)Rapid discharging: Materials are automatically discharged after rotating on the lifting plate for 5-10 minutes (high temperature warning! Special tools are required for collection).
(4)Cyclic operation: Materials can be fed directly after the end of a single batch, without repeated preheating, for continuous and efficient production.
4.Daily maintenance schedule
|
part
|
Maintenance frequency
|
Operating Instructions
|
|
Aperture/Tug
|
Once every 24 hours
|
Grease lubricated surface
|
|
Ring gear/slide
|
Once every 24 hours
|
Grease lubricated surface
|
|
Bolts in various parts
|
once a week
|
Thoroughly inspect and tighten
|
5.After-sales and guarantee
Transportation inspection: Please check the status of screw tightening and lubricating parts immediately after receiving the goods to avoid malfunction caused by loose transportation.
Warranty commitment: 1-year warranty for core components, providing operation training and maintenance guidance (except for human damage).
6.Reasons for choosing
Flexible heat source: Get rid of dependence on electricity, adapt to a variety of fuels, and expand use scenarios.
Industrial-grade durability: High-frequency maintenance design ensures long-term stable operation of the equipment in harsh environments.
Efficient output: rapid preheating + short-time discharging, increasing production capacity and reducing unit energy consumption.
Send Inquiry
Send Inquiry
